Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 125
Filtrar
1.
Chemosphere ; : 142305, 2024 May 11.
Artigo em Inglês | MEDLINE | ID: mdl-38740338

RESUMO

The widespread presence of arsenic (As) and fluoride (F-) in groundwater poses substantial risks to human health on a global scale. These elements have been identified as the most prevalent geogenic contaminants in groundwater in northern Mexico. Consequently, this study aimed to evaluate the human health and ecological risks associated with the content of As and F- in the Meoqui-Delicias aquifer, which is in one of Mexico's most emblematic irrigation districts. Concentrations of As and F- were measured in 38 groundwater samples using ICP-MS and ion chromatography, respectively. Overall, these elements showed a similar trend across the aquifer, revealing a positive correlation between them and pH. The concentration of As and F- in the groundwater ranged from 5.3 µg/L to 303 µg/L and from 0.5 mg/L to 8.8 mg/L, respectively. Additionally, the levels of As and F- surpassed the established national standards for safe drinking water in 92% and 97% of samples, respectively. Given that groundwater is used for both agricultural purposes and human activities, this study also assessed the associated human health and ecological risks posed by these elements using Monte Carlo simulation and Species Sensitivity Distribution. The findings disclosed a significant noncarcinogenic health risk associated with exposure to As and F-, as well as an unacceptable carcinogenic health risk to As through water consumption for both adults and children. Furthermore, a high ecological risk to aquatic species was identified for F- and high to medium risks for As in the sampling sites. Therefore, the findings in this study provide valuable information for Mexican authorities and international organizations (e.g., WHO) about the adverse effects that any exposure without treatment to groundwater from this region represents for human health.

2.
Heliyon ; 10(3): e25125, 2024 Feb 15.
Artigo em Inglês | MEDLINE | ID: mdl-38352798

RESUMO

Lake Victoria is the world's largest tropical lake and the third-largest water body, providing significant water resources for surrounding environments including the cultural, societal, and livelihood needs of people in its basin and along the White Nile. The aim of this study was to use decade-long time series of measured lake flow in the lake system and phosphorus deposition to develop a suitable numerical model based on shallow water equations (SWE) for assessing water quality in Lake Victoria, an increasingly important tool under climate variation. Different techniques were combined to identify a numerical model that included: i) a high-resolution SWE model to establish raindrop diffusion to trace pollutants; ii) a two-dimensional (2D) vertically integrated SWE model to establish lake surface flow and vertically transported wind speed flow acting on lake surface water by wind stress; and iii) a site-specific phosphorus deposition sub-model to calculate atmospheric deposition in the lake. A smooth (non-oscillatory) solution was obtained by applying a high-resolution scheme for a raindrop diffusion model. Analysis with the vertically integrated SWE model generated depth averages for flow velocity and associated changes in water level profile in the lake system and showed unidirectional whole lake wind blowing from the southwest to northeast. The atmospheric phosphorous deposition model enabled water value assessment for mass balances with different magnitudes of both inflows and outflows demonstrating annual total phosphorus at 13,500 tons concentrating at mid-lake western and eastern parts. The model developed here is simple and suitable for use in assessing flow changes and lake level changes and can serve as a tool in studies of lake bathymetry and nutrient and pollution transport processes. Our study opens towards refining models of complex shallow-water systems.

4.
Int J Surg ; 110(1): 507-519, 2024 Jan 01.
Artigo em Inglês | MEDLINE | ID: mdl-37830948

RESUMO

BACKGROUND: Surgical site infections (SSIs) pose a global challenge, impacting patients and healthcare expenditures. This second-order meta-analysis endeavors to assess the efficacy of antibiotic sutures in averting SSIs by amalgamating data from various meta-studies. MATERIALS AND METHODS: This research adhered to the PRISMA 2020 guidelines. The quality and comprehensiveness of the encompassed meta-analyses were assessed through the QUOROM checklist and AMSTAR techniques. The primary study overlap was evaluated via measures such as pairwise intersection heat maps, corrected covered area, and the citation matrix of evidence. The statistical power at the study-level was determined utilizing the meta-meta package. Data synthesis employed random and fixed effects models at a 95% CI. A meta-regression analysis was conducted to explore potential correlations between the CDC classification of SSIs, trial types, and the observed effect sizes in the studies. RESULTS: This investigation revealed a significant reduction in SSI rates due to antimicrobial-coated sutures, evidenced by a relative risk (RR) of 0.68 (95% CI: 0.59-0.76), with a prediction interval of 0.38-1.19. The analysis encompassed 18 studies with 22 meta-analyses, demonstrating a median QUOROM score of 13.6 out of 18 and an AMSTAR score of 9.1 out of 11. The presence of moderate heterogeneity was noted ( Q =106.611, I2 =54.038%), with nonrandomized controlled trials exhibiting an RR of 0.56 (95% CI: 0.39-0.80), and RCTs displaying an RR of 0.71 (95% CI: 0.63-0.81). Subgroup analysis unveiled variable RR reductions for specific surgical procedures. CONCLUSION: Antimicrobial-coated sutures offer a promising approach to mitigating SSIs risk. However, their efficacy is optimally realized when employed in conjunction with other robust practices.


Assuntos
Anti-Infecciosos Locais , Anti-Infecciosos , Humanos , Antibacterianos/uso terapêutico , Infecção da Ferida Cirúrgica/prevenção & controle , Suturas
5.
Sci Rep ; 13(1): 18703, 2023 10 31.
Artigo em Inglês | MEDLINE | ID: mdl-37907513

RESUMO

Septage refers to the semi-liquid waste material that accumulates in septic tanks and other onsite sanitation systems. It is composed of a complex mixture of human excreta, wastewater, and various solid particles. Septage is a potential source of water pollution owing to presence of high organic content, significant pathogen concentrations, and a range of nutrients like nitrogen and phosphorus. The harmful impacts of septage pollution poses significant risks to public health through the contamination of drinking water sources, eutrophication of water bodies and spread of water borne diseases. Conventional septage treatment technologies often face limitations such as high operational costs, energy requirements, and the need for extensive infrastructure. Therefore, with an aim to treat septage through an alternative cost effective and energy-efficient technology, a laboratory-scale constructed wetland (CW) system (0.99 m2) consisting of a sludge drying bed and a vertical flow wetland bed was utilized for the treatment of septage. The sludge drying bed and vertical flow beds were connected in series and filled with a combination of gravel with varying sizes (ranging from 5 to 40 mm) and washed sand. Canna indica plants were cultivated on both beds to facilitate phytoremediation process. The system was operated with intermittent dosing of 30 Ltrs of septage every day for 2 months. The HRT of the system was fixed at 48 h. The average inlet loads of Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS) were measured as 150 ± 65.7 g m-2 day-1, 713 ± 443.9 g m-2 day-1, and 309 ± 66.3 g m-2 day-1, respectively. After treatment, the final effluent had an average load of 6 g m-2 day-1 for BOD5, 15 g m-2 day-1 for COD, and 51 g m-2 day-1 for TSS, indicating that the CW system achieved an average removal efficiency of 88% for BOD, 87% for COD, and 65% for TSS. The average load of total coliforms and helminthes eggs in the influent was recorded as 4 × 108 Colony-Forming Units (CFU) m-2 day-1 and 3 × 107 eggs m-2 day-1, respectively. However, the CW system demonstrated significant effectiveness in reducing microbial contamination, with an average removal efficiency of 99% for both total coliforms and helminthes eggs. The vertical flow constructed wetland system, equipped with pretreatment by sludge drying bed, has proven to be efficient in treatment of septage.


Assuntos
Esgotos , Áreas Alagadas , Humanos , Esgotos/química , Eliminação de Resíduos Líquidos , Águas Residuárias , Análise da Demanda Biológica de Oxigênio , Água , Nitrogênio
7.
Sci Total Environ ; 904: 166704, 2023 Dec 15.
Artigo em Inglês | MEDLINE | ID: mdl-37657552

RESUMO

Application of greener pretreatment technology using robust ligninolytic bacteria for short duration to deconstruct rice straw and enhance bioethanol production is currently lacking. The objective of this study is to characterize three bacterial strains isolated from the milieux of cow rumen and forest soil and explore their capabilities of breaking down lignocellulose - an essential process in bioethanol production. Using biochemical and genomic analyses these strains were identified as Bacillus sp. HSTU-bmb18, Bacillus sp. HSTU-bmb19, and Citrobacter sp. HSTU-bmb20. Genomic analysis of the strains unveiled validated model hemicellulases, multicopper oxidases, and pectate lyases. These enzymes exhibited interactions with distinct lignocellulose substrates, further affirmed by their stability in molecular dynamic simulations. A comprehensive expression of ligninolytic pathways, including ß-ketoadipate, phenyl acetate, and benzoate, was observed within the HSTU-bmb20 genome. The strains secreted approximately 75-82 U/mL of cellulase, xylase, pectinase, and lignin peroxidase. FT-IR analysis of the bacterial treated rice straw fibers revealed that the intensity of lignin-related peaks decreased, while cellulose-related peaks sharpened. The values of crystallinity index for the untreated control and the treated rice straw with either HSTU-bmb18, or HSTU-bmb19, or HSTU-bmb20 were recorded to be 34.48, 28.49, 29.36, 31.75, respectively, which are much higher than that of 13.53 noted for those treated with the bacterial consortium. The ratio of fermentable cellulose in rice straw increased by 1.25-, 1.79-, 1.93- and 2.17-fold following treatments with HSTU-bmb18, HSTU-bmb20, HSTU-bmb19, and a mixed consortium of these three strains, respectively. These aggregative results suggested a novel model for rice straw deconstruction utilizing hydrolytic enzymes of the consortium, revealing superior efficacy compared to individual strains, and advancing cost-effective, affordable, and sustainable green technology.


Assuntos
Bacillus , Oryza , Animais , Bovinos , Lignina/metabolismo , Oryza/química , Rúmen , Espectroscopia de Infravermelho com Transformada de Fourier , Celulose/química , Bacillus/metabolismo , Hidrólise
8.
J Infect Public Health ; 16(10): 1562-1590, 2023 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-37572572

RESUMO

The newly discovered coronavirus SARS-CoV-2 has sparked a worldwide pandemic of COVID-19, which has caused havoc on medical infrastructures, economies, and cultures around the world. Determining the whole scenario is essential since SARS-CoV-2 variants and sub-variants keep appearing after vaccinations and booster doses. The objective of this secondary meta-analysis is to analysis co-infection, secondary infections, and antimicrobial resistance (AMR) in COVID-19 patients. This study used five significant databases to conduct a systematic review and an overlap meta-analysis to evaluate the pooled estimates of co-infections and secondary infections. The summary of the meta-analysis showed an overall co-infection effect of 26.19% (95% confidence intervals CI: 21.39-31.01, I2 =98.78, n = 14 meta-analysis) among patients with COVID-19. A coinfection effect of 11.13% (95% CI: 9.7-12.56, I2 =99.14, n = 11 meta-analysis) for bacteria; 9.69% (95% CI: 1.21-7.90, I2 =98.33) for fungal and 3.48% (95% CI: 2.15-4.81, I2 =95.84) for viruses. A secondary infection effect of 19.03% (95% CI: 9.53-28.54, I2 =85.65) was pooled from 2 meta-analyses (Ave: 82 primary studies). This is the first study that compiles the results of all the previous three years meta-analyses into a single source and offers strong proof of co-infections and secondary infections in COVID-19 patients. Early detection of co-infection and AMR is crucial for COVID-19 patients in order to effective treatment.


Assuntos
COVID-19 , Coinfecção , Humanos , Coinfecção/microbiologia , SARS-CoV-2 , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Farmacorresistência Bacteriana
9.
Sci Rep ; 13(1): 11168, 2023 Jul 10.
Artigo em Inglês | MEDLINE | ID: mdl-37429943

RESUMO

Although geogenic Arsenic (As) contamination is well-recognized in northern Chile, it is not restricted to this part of the country, as the geological conditions favoring As release to the human environment exist across the country as well, although not at the same level, based on comparatively fewer studies in central and southern Chile. The present work provides a critical evaluation of As sources, pathways, and controls with reports and case studies from across the country based on an exhaustive bibliographic review of its reported geogenic sources and processes that affect its occurrence, systematization, and critical revision of this information. Arc magmatism and associated geothermal activities, identified as the primary As sources, are present across the Chilean Andes, except for the Pampean Flat Slab and Patagonian Volcanic Gap. Metal sulfide ore zones, extending from the country's far north to the south-central part, are the second most important geogenic As source. While natural leaching of As-rich mineral deposits contaminates the water in contact, associated mining, and metallurgical activities result in additional As release into the human environment through mining waste and tailings. Moreover, crustal thickness has been suggested as a principal controlling factor for As release, whose southward decrease has been correlated with lower As values.

11.
Ann Med Surg (Lond) ; 85(6): 3213-3217, 2023 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-37363468

RESUMO

Dengue virus infection, a highly prominent health concern, has caused many health complications, positive cases, and deaths in Bangladesh in previous years. However, the prevalence of this infection and fatality rates in 2022 has shattered all prior records. The dengue virus vector, mosquitoes, found a high prevalence of infection due to the weather's favorable conditions for breeding in the months of June and July. While there is presently no particular vaccination for dengue infection, awareness of its epidemiology, pathogenesis, signs, and symptoms may aid in the development of improved diagnostic and treatment strategies. The government should also improve the infrastructure of cities to make prevent mosquito breeding and the spread of dengue infection.

13.
RSC Adv ; 13(22): 14914-14929, 2023 May 15.
Artigo em Inglês | MEDLINE | ID: mdl-37200696

RESUMO

Arsenic is a widespread serious environmental pollutant as a food chain contaminant and non-threshold carcinogen. Arsenic transfer through the crops-soil-water system and animals is one of the most important pathways of human exposure and a measure of phytoremediation. Exposure occurs primarily from the consumption of contaminated water and foods. Various chemical technologies are utilized for As removal from contaminated water and soil, but they are very costly and difficult for large-scale cleaning of water and soil. In contrast, phytoremediation utilizes green plants to remove As from a contaminated environment. A large number of terrestrial and aquatic weed flora have been identified so far for their hyper metal removal capacity. In the panorama presented herein, the latest state of the art on methods of bioaccumulation, transfer mechanism of As through plants and animals, and remediation that encompass the use of physicochemical and biological processes, i.e., microbes, mosses, lichens, ferns, algae, and macrophytes have been assessed. Since these bioremediation approaches for the clean-up of this contaminant are still at the initial experimental stages, some have not been recognized at full scale. Nonetheless, extensive research on these primitive plants as bio-accumulators can be instrumental in controlling arsenic exposure and rehabilitation and may result in major progress to solve the problem on a worldwide scale.

14.
Sci Total Environ ; 892: 163774, 2023 Sep 20.
Artigo em Inglês | MEDLINE | ID: mdl-37230352

RESUMO

Avirulent halotolerant plant growth-promoting rhizobacteria (HPGPR) located on the roots' periphery can reduce abiotic stressors (such as salinity and drought), enhance plant productivity. Salinity poses a significant challenge for growing agricultural products, like rice, in the coastal regions. It is crucial to enhance production because of limited arable land and the high growth rate of the population. This study targeted to identify HPGPR from legume root nodules and assessed their effects on rice plants experiencing salt stress in coastal regions of Bangladesh. Based on the culture morphology, biochemical, salt, pH, and temperature tolerance traits, sixteen bacteria were isolated from the root nodules of leguminous plants (Common bean, Yardlong bean, Dhaincha, and Shameplant). All the bacterial strains can tolerate 3 % salt concentration, and capable to survive at the highest 45 °C temperature and pH 11 (without isolate 1). Three preeminent bacteria, Agrobacterium tumefaciens (B1), Bacillus subtilis (B2), and Lysinibacillus fusiformis (B3) were specified through morpho-biochemical and molecular (16S rRNA gene sequence) exploration for inoculation. To assess the plant growth-promoting activities, germination tests are applied where bacterial inoculation increased germination in saline and non-saline conditions. Control group (C) showed 89.47 % and bacterial treated groups (C + B1, C + B2, and C + B3) 95 %, 90 %, and 75 % germination after 2 days of inoculation. In (1 % NaCl) saline condition control group revealed 40 % whereas three groups with bacteria showed 60 %, 40 %, and 70 % germination after 3 days, which increased 70 %, 90 %, 85 %, and 95 % respectively after 4 days of inoculation. The HPGPR significantly improved plant development metrics such as root length, shoot length, fresh and arid biomass yield, chlorophyll content, etc. Our results suggest that the salt-resistant bacteria (Halotolerant) have a great potential role in recuperating plant growth and would be cost-effective as a bio-inoculant in saline conditions to be used as a prospective bio-fertilizer for rice production. These findings indicate that the HPGPR has a substantially promising function in reviving plant development in an eco-friendly manner.


Assuntos
Oryza , Plântula , Oryza/genética , RNA Ribossômico 16S/genética , Estudos Prospectivos , Plantas Tolerantes a Sal/genética , Estresse Salino , Bactérias , Salinidade , Raízes de Plantas/microbiologia
15.
J Environ Manage ; 343: 118222, 2023 Oct 01.
Artigo em Inglês | MEDLINE | ID: mdl-37235991

RESUMO

Biochar, a promising carbon-rich and carbon-negative material, can control water pollution, harness the synergy of sustainable development goals, and achieve circular economy. This study examined the performance feasibility of treating fluoride-contaminated surface and groundwater using raw and modified biochar synthesized from agricultural waste rice husk as problem-fixing renewable carbon-neutral material. Physicochemical characterizations of raw/modified biochars were investigated using FESEM-EDAX, FTIR, XRD, BET, CHSN, VSM, pHpzc, Zeta potential, and particle size analysis were analyzed to identify the surface morphology, functional groups, structural, and electrokinetic behavior. In fluoride (F-) cycling, performance feasibility was tested at various governing factors, contact time (0-120 min), initial F- levels (10-50 mg L-1), biochar dose (0.1-0.5 g L-1), pH (2-9), salt strengths (0-50 mM), temperatures (301-328 K), and various co-occurring ions. Results revealed that activated magnetic biochar (AMB) possessed higher adsorption capacity than raw biochar (RB) and activated biochar (AB) at pH 7. The results indicated that maximum F- removal (98.13%) was achieved using AMB at pH 7 for 10 mg L-1. Electrostatic attraction, ion exchange, pore fillings, and surface complexation govern F- removal mechanisms. Pseudo-second-order and Freundlich were the best fit kinetic and isotherm for F- sorption, respectively. Increased biochar dose drives an increase in active sites due to F- level gradient and mass transfer between biochar-fluoride interactions, which reported maximum mass transfer for AMB than RB and AB. Fluoride adsorption using AMB could be described through chemisorption processes at room temperature (301 K), though endothermic sorption follows the physisorption process. Fluoride removal efficiency reduced, from 67.70% to 53.23%, with increased salt concentrations from 0 to 50 mM NaCl solutions, respectively, due to increased hydrodynamic diameter. Biochar was used to treat natural fluoride-contaminated surface and groundwater in real-world problem-solving measures, showed removal efficiency of 91.20% and 95.61%, respectively, for 10 mg L-1 F- contamination, and has been performed multiple times after systematic adsorption-desorption experiments. Lastly, techno-economic analysis was analyzed for biochar synthesis and F- treatment performance costs. Overall, our results revealed worth output and concluded with recommendations for future research on F- adsorption using biochar.


Assuntos
Água Subterrânea , Oryza , Poluentes Químicos da Água , Purificação da Água , Fluoretos , Oryza/química , Purificação da Água/métodos , Carvão Vegetal/química , Adsorção , Água Subterrânea/química , Cinética , Concentração de Íons de Hidrogênio
17.
Heliyon ; 9(4): e15200, 2023 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-37123923

RESUMO

In Bangladesh, people primarily depend on on-site sanitation facilities (OSSF) with an immense challenge in achieving safe sanitation due to unplanned infrastructure development, improper management of fecal sludge, and inadequate monitoring. The commitment of attaining Sustainable Development Goals (SDG) 6.2 (ensuring safe sanitation for all) by 2030 requires immediate attention in the management of fecal sludge for low-middle income countries. This paper presented the findings, challenges, and possible ways forward from a study conducted to provide data for Information and Communication Technology (ICT)-based fecal sludge management (FSM) at a municipality in the northwest of Bangladesh. A total of 18,808 households and 407 institutions in Saidpur municipality, a non-sewered town in Nilphamari district, were studied to understand the type of containment structures and on-ground desludging practices. The study showed around 10% of containments were connected to the drains illegally, 95% of the people in Saidpur practiced unsafe disposal, and 7% still practiced open defecation. To identify these malpractices, the study also implemented an ICT-based sustainable solution through a web application that enabled the local administrator to have a global look at the sanitation scenario of the municipality. The dashboard was developed to create a total sanitation monitoring system, identify defaulters, allow target-based safe managed sanitation service strategies, and ensure sustainability in FSM. The study highlighted the accessibility of vacuum truck services projecting through a spatial map and identified methods to empty the septic tanks where Vacutag services are unavailable by engaging local pit emptiers. The innovative approach of fecal sludge management will help not only to improve the existing sanitation practices but also raise community awareness to ensure sustainable sanitation system. Altogether, the web system will work as a medium to manage the faecal sludge for the existing co-compost plant where the faeces is converted into organic soil conditioner, creating prospects for a green business mechanism.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA